Відео

This pump is trash. The impeller can freely spin it just doesnt

You really need to slow down and show the emblems that you’re going to like the backwash. I couldn’t really see it like the rent cycle. You couldn’t see the emblem that is very important if you’re trying to train someone.

Take a water hose & spray them off dumbass

Great video. You should wear latex gloves when using the carb cleaner.

Thank you for making this video! My pump didn't work after putting it away for the winter and spring. I took the pump apart, cleaned the rotor and boom its back in business.

These are trash ! I have one and I have an updated one they are no good no matterwhat you do to try to keep them running they stop after a while.

Thank you so much for this tutorial. For someone who has never replaced a lawn mower pull rope before, your instructions made it so easy to do!

How often do you change the filter? Is it usual to use one a day?

The gf is on. No power at push button switches

Like and Leave a Comment! Here are some links to the products I mention in the video: -Bestway Steel Pro Max 15' dia. x 42" high : amzn.to/3xkiWU5 -Bestway Sand Filter Pump: amzn.to/45BTvtC -Pool Vacuum: amzn.to/4ey3LHv -Pool Skimmer: amzn.to/45AXGGc -Chlorine Float: amzn.to/3xyzSpR -Pool Chemicals Starter Kit: amzn.to/4exh7DR (These affiliate links will take you to products that, if you purchase them, they will send me a VERY SMALL commission which helps me make more videos. Thanks!)

If I don’t have oxyclean, what should I use in substitution?

Mine stopped working and the gasket is there. I added pressure to the bottoms to close it tighter and the suction improved more so than before. It actually whirled the trash inside the canister. So even with the gasket, it needs more pressure or a thicker gasket. My vacuum is about a year old😊

All I did was take it apart per your instructions and put it back together. This is the first time the pump has worked! Thank you so much. I was ready to trash it.

I have the same little pump for my pool and it doesn’t flow water out like yours does! Idk why! 😮

Here are links to what I'm talking about in this video: -To replace the GFCI plug on your Intex or Bestway Flowclear filter pump (if it does not turn on), Click here: amzn.to/3CCnIew -The Cheaper 58516E Bestway Flowclear Sand Filter Pump that I bought is here: amzn.to/3NBUdi0 -The more expensive version of this pool pump model is the1500 Gallon Sand Filter: amzn.to/3pJq2xp -I highly recommend Pool Filter Sand (although I bought mine locally) instead of regular sand: amzn.to/3O3HF4u -Here is the Bestway Steel Pro Max 14' pool kit: amzn.to/3CyMegu (These links will take you to an affiliate listing that will pay me a very small commission if you purchase. This helps me to continue making videos. Thanks!)

We got our pump last year! And it's not even turning on 😢 I have to look for the name of it, the pump we got with the pool was junk! That's why I bought a different one.

What if my pump isnt filling up all the way with water? Like when its on and i twist to release air, water is suppossed to come out and it doesnt.

My pool is crystal clear bit I knew the filter hasn't been cleaned in a couple of nights. I believe it's going to make it turned off till tomorrow. That pump I always have it running

In my dang frustration i pulled the lid off (for the 2nd time tonight ) but this time didnt have the holes plugged

The freaking thing does this everytime. Amd my daughters bf comes and ba before i know what happens he has it fixed.

I got thia same pool. But this dang pump has gotten on my last nerve. I have been dooing do well for my first pool. But right now im going go smash this one.

Great video. Thanks!

So what about the 1 out 10 times both lights are on and doesnt work? Mine is like that, is my motor fried?

Love your video brother!!! Thanks

It also has GFCI or sometimes it will trip breaker for protection

Thanks!

What hose goes where

My Toro 149cc refuses to interface with the flywheel after following these instructions. Literally just spins free above the motor

Was looking for an idea to build a cover for a surround for an inflatable spa, this will work well.

Hey Jason, are you going to do a follow up on how long this treatment lasts?

How well would this work in colder climates?

Are all the model numbers for that mower the same if so can I have it to order parts my model number is not readable thank you very much

1 minute in…yes it’s the air filter. Nastiest dang thing I’ve EVER seen!

OMG, that gasket used to be there, I bang this out on the garbage can to clean it out, it must have slipped out one time recently and I didn't notice, it's long gone now! I've been trying to figure out why no suction for a couple weeks now, cleared the tube, cleaned the filter, etc, nothing helped. THANK YOU!

Awesome video sir. Looking forward to the addition of spot lock. I really enjoy diy projects and I am a cheapskate by nature so you video is right up my alley

I have both lights on but it still wont start

I have the same unit, thank you very much for the video.

GOOD VIDEO!

Could you give some keywords that maybe included for the gear box, or are they just that generic? The hardest part for me remote automating a trolling motor has been the steering mechanism.

Nice work! I've installed Pwm's on a couple of tm and it almost doubles the Ah. If this helps anyone, I bought a Haswing Cayman that's half the price of others, works great and doesn't need a Point One antenna! (another $300)

Awesome video! Very Helpful! I had my Rope pop and figured it wouldn’t be to hard , but I’m not that Mechanically inclined lol. This video is definitely a Big Help! Thanks!

Here's a link to the parts I've replaced in my hot tub control panel: --Gecko Y Series In.Ye-5 Bundle: amzn.to/4ajTbkp (good for Balboas, too!) --Aqua Flo Master 230v Spa Pump: amzn.to/49h6gKB --Aqua Flo (Wet End only): amzn.to/3TkuVrD --In.K200-20P Topside Display: amzn.to/3vgfwR8 --Ratcheting screwdriver: amzn.to/4cjLmgq (These affiliate links will take you to products that, if you purchase them, they will give me a commission which helps me make more videos. Thanks!)

Step by Step video on how to put a killswitch on a DIY Remote Controlled Wireless Electric Trolling Motor Battery with a Minn Kota, Motorguide, or other brand for motorized kayak or boat: ua-cam.com/video/FvlyGomCEmQ/v-deo.html

Step by Step video here: ua-cam.com/video/FvlyGomCEmQ/v-deo.html

Thanks for your video very explanatory And thank for the parts links

But why is this happening?

Watch the full hour DIY build video here: ua-cam.com/video/FvlyGomCEmQ/v-deo.html

How heavy is it? Here in the midwest we get heavy winds and just thinking if it would get blown off.

What does it means if my GFCI plug led lights up, but the start button on the unit does not?